-
1Soak the filter in a clean bowl of water for 5 minutes, then rinse for 30 seconds.
-
2Insert the foam filter and the silicone pipe onto the water pump.
-
3Add water to the tank, install the water tray, and fasten the snap lids.
-
4Attach the soaked filter and install the filter lid.
-
5Turn on the power switch of the base (radar induction mode) or connect the power supply to the base and turn on the power switch (continuous water flow mode).
-
6Place the water tank on the charging base by aligning the protruding hole of the water tank with the tank base.