You can refer to the following steps to adjust the feeding plan on the Granary Automatic Feeder:
1. After the current time is set, icon 1 will flash, indicating it's ready for you to configure the settings of the first meal.
Press the Setting button to set the feeding time. The hour field of the time icon will flash. Press the lncrease/Decrease button +/- to adjust the hour. Press the Setting button to save.
2. Then the tens digits of the minutes field will flashe, press the lncrease/Decrease button +/- to adjust tens digits and press the Setting button to save. Next, adjust the single digit of the minutes field and press the Setting button to save.
3. After the feeding time is set, the screen will display P-XX, indicating it's ready to adjust the number of portions for the meal (Max 50). Press the lncrease/Decrease button +/- to adjust the tens digit, then press the Setting button to save.
4. Then the single digit will flash, press the lncrease/Decrease button +/- to adjust the single digit of the portion. Press the Setting button to save. Repeat the process above to adjust other meals if needed.
5. If you want to skip a feeding plan, you can press the lncrease button/+ to skip the setup of the feeding schedule for different meal numbers, represented by the flashing meal number icon.
If you want to go back to a previous meal plan setting, you can press the Decrease button/- when the meal number icon is flashing.
Cancel/Delete a feeding plan
1. If you want to cancel/delete one of the feeding plans, press the lncrease/Decrease button +/- to adjust the portion to 0 when you set the portion. Then press the setting button to save.
2. If you want to clear all the feeding schedules/plans, please reset the feeder. Press and hold the Increase/Decrease buttons +/- simultaneously for 6 seconds until the machine emits three beeps. All icons on the screen will light up, indicating the reset is complete.
